Thread

Introduction
Screenshots
License
Download
Userinterface
Function Index
White Papers
Community
Contact

Use your OpenID:

getopenID

no help

OSX version not working?

by anonymous - 3 Oct 2009, 17:27 CEST

Hallo zusammen

Beim ersten Versuch den layouteditor zu verwenden (OSX10.4.11) bekomme ich einen Absturz. Hier der (für mich) interesssante Teil aus dem Crash-log:
Link (dyld) error:

Symbol not found: _kTISPropertyUnicodeKeyLayoutData
Referenced from: /Users/kl/Desktop/layout/layout.app/Contents/MacOS/../Frameworks/QtGui.framework/Versions/4/QtGui
Expected in: /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon

Was mache Ich falsch?
Gruß Klaus Kloos

by Juergen Thies - 3 Oct 2009, 17:49 CEST

Es wurde the cocoa version vom LayoutEditor verwendet, jedoch es sind nicht alle benötigten Bibliotheken hierfür vorhanden.

Abhilfe:
Entweder die neuste Version des Mac cocoa frameworks installieren oder die carbon version des LayoutEditors verwenden.

in english:
The cocoa version of the LayoutEditor was used, but not all required libraries for it exist on the system. Install the newest version of the mac cocoa framework or use the carbon version of the LayoutEditor.

Please log in to post!

The LayoutEditor™ is a program to design and edit layouts for MEMS/IC fabrication and CMOS IC design .Designing these layouts require a high precision. In IC design a sufficient resolution and a possibility of a high scaling is required. The resolution of the LayoutEditor can be set in a wide range and is normally set to 1 nano meter. A higher resolution makes no sense due to atomar structures. With this resolution the LayoutEditor can draw elements up to 4 meters. In many IC design houses this is enough for IC/MEMS which extend usually less than 0.1 meters. The productions of MEMS/IC is done in many layers. For each of these physical CAD layers a belonging layer had to exist in the drawing. Additional logical layers are required for describing/naming purpose. So a lot of layers are needed. By default the LayoutEditor is limited to 128 layers. But it can easily be adjusted, if more layers are required. IC Designs often contain a plenty of repeating structures. Essential for micro fabrication of these designs is therefor a hierarchical design. This means, that the complete repeating structure only exists once in a single cell. These cell is then referred multiple times in the main drawing.
Beside the above mems packaging mentioned IC design fundaments it is important to have sophisticated functions to handle all drawing elements. The layout handler has all required functions: all basic design functions, all angle elements, boolean operations, macros, fontgenerator, design rule checker, mems tools, supported format: GDSII, DXF, OASIS, CIF. If you still missing a function, you are free to write a feature request

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -